OLD ENGINES

Here is a list of the major items that we are interested in selling.

There are a number of items that are not pictured including

Bulldog 4 hp engine - runs

1968 MTD riding mower

reel type push mowers

garden cultivators

Maytag engines - some running

misc engine parts

misc flat belt pulleys

Misc old air cooled engines - not running

Old iron trim from old sleigh

Below are pictures of equipment that we would like to sell - as it sits.

Adams grader1.JPG (48331 bytes)

This is an Adams Leaning Wheel Grader.  It's in pretty good condition but is missing the blade operating handles (wheels).
Also shown is a large walkbehind plow blade and parts of of pot belly stove.

aircooled1.JPG (36822 bytes)
Old flat head air cooled engine - runs

aircooled2.JPG (30977 bytes)
Unique Air cooled with external pushrods and lever handle starter.

Bulldog1.JPG (32622 bytes)
Bulldog - comeplete and will run.

elect motor1.JPG (29189 bytes)
Electric motor with speed reduction gearbox.

generator1.JPG (30671 bytes)
Generator from old fire truck.  Cranks start . Complete - will run.

generator2.JPG (28105 bytes)
Small Generator with 2 cycle motor - complete- will run.

generator3.JPG (31368 bytes)
Universal 4 cylinder Generator.  Complete - will run.   Crank start, mag has been professionally rebuilt.  
Generator needs some brush springs but will produce electricity.  

green motor1.JPG (34068 bytes)
Hit and Miss is complete and will run with battery.

green motor2.JPG (29103 bytes)
Hit and miss is complete and will run - mag may need recharging.

H&M1.JPG (30017 bytes)
Hit and Miss not complete - lacks rocker, mag and carb.  Turns free.

 

H&M2.JPG (29647 bytes)
Hit and Miss Turns free not complete.

H&M3.JPG (32617 bytes)
Hit and Miss turns free and complete - needs attention to run.

H&M4.JPG (28886 bytes)
Hit and Miss turns free but is disassembled.   head and parts in container.

Hay rake1.JPG (50296 bytes)
Hay Rake.   Some tines missing.

heater1.JPG (38078 bytes)
Old kerosene heater.   Small Hit and miss engine to the left.

Misc1.JPG (40627 bytes)
The disassembled from above, aircooled on bench, wooden box on bench, electric piston water pump below.

Mixer1.JPG (42973 bytes)
Cement mixer.   Works OK.   Needs tires.

mixer engine1.JPG (36943 bytes)
Hit and Miss Engine in Cement Mixer

novo1.JPG (32810 bytes)
Novo upright engine.   complete but needs attention to run.

old briggs1.JPG (30689 bytes)
Misc - air cooled , water pump and gear box.

Outboard1.JPG (27290 bytes)
Old outboard motors - appear complete

outboard2.JPG (26132 bytes)
Old outboard motors - appear complete

outboard3.JPG (32168 bytes)
Old outboard motors - appear complete.   The one on the right is 12Vdc.

outboard4.JPG (26626 bytes)
Old outboard motors - appear complete

outboard5.JPG (27200 bytes)
Old outboard motor - appear complete

outboard6.JPG (28407 bytes)
Old outboard motors - appear complete

Outboard7.JPG (30119 bytes)
Old outboard motors - appear complete

Pedal start1.JPG (29433 bytes)
Pedal Start air cooled.

pot belly stove1.JPG (29978 bytes)
Pot Belly Stove

Pulley1.JPG (40221 bytes)
Old Pulley

radiator1.JPG (36295 bytes)
Radiator and aircooled

red motor1.JPG (36146 bytes)
Hit and Miss - complete

REO1.JPG (42589 bytes)
Reo mower complete - two cycle reel type.   Spare motor also.

Saw blade1.JPG (24629 bytes)
Saw Blade

Saw stand1.JPG (28169 bytes)
Circular Saw on stand with shaft and flat belt pulley.

 

whistle1.JPG (25366 bytes)
Whistle

wood stove.JPG (27368 bytes)
Wood Stove